|
XPL-2BJ |
STOW-A-WAY BASE 2.5"BSP FEMALE INLETS
|
|
XPH-2BP |
SAFE-TAK BASE 4.0"BSP MALE DOUBLE INLET
|
|
XPH-1BP |
SAFE-TAK BASE 4.0"BSP MALE SINGLE INLET
|
|
XPL-1BP |
STOW-A-WAY BASE 4.0"BSP MALE
|
|
XPL-2BP |
STOW-A-WAY BASE 2 X 4.0"BSP MALE INLETS
|
|
XFH-1NN |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFAN-1NP |
The STOW-A-WAY 1250 PORTABLE BASE WITH VALVE is supplied with single full-time swivel inlet. High volume/low loss valve meets NFPA slow close requirements . Includes a safety tie-down strap with attached storage cap. The stainless steel, carbide-tipped base support legs can be folded to fit inside compartments or for carrying preconnected to a hose line. STOW-A-WAY 1250 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way 1250 Valved Base in portable mode is 1250 gpm (4750 l/min).
|
|
XFH-1NL |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFH-2NJ |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFL-1ST |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XPH-1BX |
SAFE-TAK BASE 6.0"BSP MALE SINGLE INLET
|
|
XPL-1BX |
STOW-A-WAY BASE 6.0"BSP MALE INLET
|
|
XFL-2NJ |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XPH-1ST |
SAFE-TAK BASE 5" STORZ SINGLE INLET
|
|
XFH-2BIC |
SAFE-TAK BASE - 2.5"BIC MALE INLETS
|
|
|
XFH-1SX |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XPL-1SP |
STOW-A-WAY BASE 4" STORZ
|
|
XPH-1SP |
SAFE-TAK BASE 4" STORZ SINGLE INLET
|
|
XFAN-1SP |
The STOW-A-WAY 1250 PORTABLE BASE WITH VALVE is supplied with single full-time swivel inlet. High volume/low loss valve meets NFPA slow close requirements . Includes a safety tie-down strap with attached storage cap. The stainless steel, carbide-tipped base support legs can be folded to fit inside compartments or for carrying preconnected to a hose line. STOW-A-WAY 1250 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way 1250 Valved Base in portable mode is 1250 gpm (4750 l/min).
|
|
XPL-1ST |
STOW-A-WAY BASE 5" STORZ
|
|
XPH-2BJS |
SAFE-TAK BASE 2.5"BSP FEMALE DBL INLET
|
|
XPH-2BJM |
SAFE-TAK BASE 2.5"BSP MALE DOUBLE INLET
|
|
XPT-BJ |
CROSSFIRE MONITOR TOP - 2.5"BSP MALE OUT
|
|
XFH-2SJ |
SAFE-TAK BASE - 65MM STORZ (2.5")
|
|
XFT-BJ |
CROSSFIRE MONITOR TOP 2.5"BSPM OUTLET
|
|
XFH-1ST |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFL-1NR |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XFAN-1ST |
The STOW-A-WAY 1250 PORTABLE BASE WITH VALVE is supplied with single full-time swivel inlet. High volume/low loss valve meets NFPA slow close requirements . Includes a safety tie-down strap with attached storage cap. The stainless steel, carbide-tipped base support legs can be folded to fit inside compartments or for carrying preconnected to a hose line. STOW-A-WAY 1250 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way 1250 Valved Base in portable mode is 1250 gpm (4750 l/min).
|
|
XFL-1NP |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XFH-1SP |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
|
XFL-1NN |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XFH-2SL |
SAFE-TAK BASE - 75MM STORZ (3")
|
|
XFL-1NL |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $570.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XFT-NJ |
CROSSFIRE MONITOR TOP 2.5"NH (65mm) OUTLET can be connected to either a portable base or a truck with the adapters on page 72 or a TFT Extend-A-Gun with XL outlet on page 137. The connection is easy, positive, and visually verified. When in use, the release is "locked out" by water pressure. The waterway is a large 3.25" (83mm) which lets the CROSSFIRE deliver up to 1250 gpm (4750 l/min) with low friction loss. Horizontal rotation is securely locked with a simple lever, and position can be visually confirmed. Only seven (7) turns of the handwheel change the discharge elbow from vertical to the stop elevation. Includes highly visible pressure gauge and built-in automatic drain valve. Standard outlet thread is male 2.5" NH (65mm).
|
|
XFL-1SP |
The STOW-A-WAY 800 PORTABLE BASE WITHOUT SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. Includes a safety tie-down strap with attached storage cap. STOW-A-WAY 800 portable base is not equipped with SAFE-TAK™ "Flow Safety Valve." Maximum recommended flow with Stow-A-Way Base in portable mode is 800 gpm (3500 l/min). Order XF500-KIT Option $500.00 to add a flow safety valve. Weight of safety valve is 3.1 lb (1.4kg).
|
|
XFH-2BJ |
SAFE-TAK BASE - 2.5"BSP FEMALE INLETS
|
|
XFL-2SL |
STOW-A-WAY BASE 75MM STORZ (3")
|
|
XFH-1NR |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFH-1NP |
SAFE-TAK 1250 PORTABLE BASE WITH SAFE-TAK VALVE is supplied with either two clappered swivel inlets or with a single full-time swivel inlet. The stainless steel, carbide-tipped base support legs can be folded to easily fit inside a small apparatus compartment, or for carrying pre connected to a hose line. Includes a safety tie-down strap with attached storage cap.
|
|
XFH-2BP |
SAFE-TAK BASE - 4.0"BSP MALE INLETS
|
|
XPH-2BJ |
SAFE-TAK BASE 2.5"BSP DUAL FEMALE INLETS
|
|
XFH-1MNP |
SAFE-TAK BASE 4.0"NH MALE
|
|
XFT-NJ-RAL |
CROSSFIRE MONITOR TOP 2.5"MALE OUTLET
|
|